DAY：2023-3-14
Plastic crusher is the ideal plastic machinery equipment for recycling and reprocessing of waste plastic. Correct maintenance and maintenance is a good way to prolong the life of the machinery.
The method of daily maintenance and maintenance of plastic crusher mainly has the following aspects:
1, should be placed in a ventilated position, to ensure the working heat distribution of the motor, extend its life.
2. Lubricating oil should be added to bearings regularly to ensure lubricity between bearings.
3, regular check the knife screw, 1 hour after use, use the tool to tighten the screw of the moving tool, fix the tool, strengthen the fixity between the blade and the tool rest.
4. In order to ensure the sharpness of the knife incision, the knife should be regularly checked to ensure its sharpness and reduce the unnecessary damage to other parts caused by the blunt edge.
5. When replacing the tool, the gap between the moving tool and the fixed tool: 0.8MM of the crusher above 20HP is preferable, 0.5MM of the crusher below 20HP is preferable. The thinner the recycled material is, the gap can be appropriately enlarged.
6. Before starting the second time, the remaining debris in the machine room should be removed first to reduce the starting resistance. The inertia hood and belt wheel cover should be opened regularly to clear the ash outlet below the flange, because the powder is discharged into the rotating shaft bearing from the plastic crusher chamber.
7. The machine should be well grounded.
8, regular check whether the plastic crusher belt slack, timely tighten.
